South Eastern Railway, Engineering Department

MANUAL FOR FUSION WELDING OF RAILS BY THE ALUMINO-THERMIC PROCESS

LIST OF FIGURES

Fig. 3. 1 (a)

Tolerance on the end bends in the vertical plane

Fig. 3. 1 (b)

Tolerance on the end bends in the horizontal plane

Fig. 3. 1 (c)

Tolerance on the end bends in the horizontal plane

 Fig. 4.7.1.1 (a) & (b)

Tolerance for lateral alignment at the time of welding

Fig. 4.7.1.2

Tolerance for vertical alignment at the time of welding

Fig. 5.1

Details of insulation hood

Fig. 5.4.2

Tolerances on finished welds